From kozick@charcoal.eg.bucknell.edu Tue Feb  3 11:11 EST 1998
Date: Tue, 3 Feb 1998 11:10:55 -0500
From: Kozick Rich  <kozick@aqua.eg.bucknell.edu>
To: tilton@bucknell.edu, movesian@bucknell.edu, tapal@bucknell.edu,
        freeston@bucknell.edu, zkulis@bucknell.edu, bbeaver@bucknell.edu,
        paullo@bucknell.edu, boothby@bucknell.edu, pankake@bucknell.edu,
        jegreene@bucknell.edu, vary@bucknell.edu, ganiear@bucknell.edu,
        zorn@bucknell.edu, marraro@bucknell.edu, sgordon@bucknell.edu,
        dkline@bucknell.edu, jaranck@bucknell.edu, lwil@bucknell.edu,
        jcarey@bucknell.edu, campbell@bucknell.edu, ligong@bucknell.edu,
        suqi@bucknell.edu, yuesun@bucknell.edu, fhaosng@bucknell.edu,
        rejmer@bucknell.edu, kozick@bucknell.edu
Subject: Projec 1 note

Hi,

When you analyze the sampled data using the FFT, the signal duration
(in seconds) can be calculated in MATLAB by typing:

    N*(1/8192)

because N is the number of samples and 1/8192 is the spacing between
samples.

Thanks.

Rich Kozick